MC9S12HZ256CAL ic crack

Beijing Sichip offers the MC9S12HZ256CAL code extraction service. Welcome to touch me for more details. Email: sichip209@gmail.com  Skype: techip.mcu.02

The MC9S12HZ256CAL features a 32x4 liquid crystal display controller/driver, a pulse width modulator motor controller consisting of 16 high current outputs suited to drive up to four stepper motors, and four stepper stall detectors (SSD) to simultaneously calibrate the pointer position of each motor.

The MC9S12HZ256CAL is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit, up to 256K bytes of Flash EEPROM or ROM, up to 12K bytes of RAM, 2K bytes of EEPROM, two asynchronous serial communications interfaces, a serial peripheral interface, an IIC-bus interface, an 8-channel 16-bit timer, a 16-channel, 10-bit analog-to-digital converter, a six-channel pulse width modulator, and two CAN 2.0 A, B software compatible modules.

CY8C9520 mcu reverse

Beijing Sichip offers the CY8C9520 code extraction service. Welcome to touch me for details. Email: sichip209@gmail.com  Skype: techip.mcu.02

The CY8C9520 is a multi-port I/O expander with on-board useravailable EEPROM and several PWM outputs. All devices in this family operate identically but differ in I/O pins, number of PWMs, and internal EEPROM size.

The CY8C9520 operates as two I2C slave devices. The first device is a multi-port I/O expander. The second device is a serial EEPROM. Dedicated configuration registers can be used to disable the EEPROM. The EEPROM utilizes 2-byte addressing to support the 28-Kbyte EEPROM address space. The selected device is defined by the most significant bits of the I2C address or by specific register addressing.

ATtiny88 chip decryption

Beijing Sichip can provide ATtiny88 mcu decryption service. If you have needs to crack ATtiny88, touch me. Email: sichip209@gmail.com

ATtiny88 is the Atmel® maXTouch® family of touchscreen microcontrollers offers world-class signal-to-noise ratio and high resolution, so your touchscreen-based devices can support a stylus, fingernails and gloved fingers.

ATtiny88 is In-System Reprogrammable Flash memory.A flexible interrupt module has its control registers in the I/O space with an additional Global Interrupt Enable bit in the Status Register.The I/O memory space contains 64 addresses for CPU peripheral functions as Control Registers, SPI, and other I/O functions.

ATtiny88 reverse engineering，ATtiny88 mcu attack，ATtiny88 code extraction

TMS320LF2406 reverse engineering

Beijing sichip is a professional company to offer the TI DSP crack service. Now we can finish the TMS320LF2406 chip decryption within 2 hours.


TMS320F2832  TMS320F28335 TMS320F2401
TMS320F2802X TMS320F2803X TMS320F2806X
TMS320F28200 TMS320F28020 TMS320F28021 code extraction
TMS320F28032 TMS320F28034 TMS320F28035
TMS320F241   TMS320F240   TMS320F243
TMS320F2402  TMS320F2406  TMS320F2407

We can crack the all TMS320F28 series, welcome to touch me for more information. Email: sichip209@gmail.com  Skype: techip.mcu.02

MSP430G2544 dsp crack

The MSP430G2544 is an ultra-low-power mixed signal microcontroller. Beijing Sichip offers the MSP430G2544 code extraction service. If you have such needs, welcome to touch me. Email: sichip209@gmail.com  Skype: techip.mcu.02

Features of MSP430G2544:
Low Supply Voltage Range: 1.8 V to 3.6 V
Ultra-Low-Power Consumption
Active Mode: 270 µA at 1 MHz, 2.2 V
Standby Mode: 1 µA
Off Mode (RAM Retention): 0.1 µA
Ultra-Fast Wake Up From Standby Mode in Less Than 1 µs
16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
Basic Clock Module Configurations
Internal Frequencies up to 16 MHz With Four Calibrated Frequencies
Internal Very-Low-Power Low-Frequency (LF) Oscillator
32-kHz Crystal
High-Frequency (HF) Crystal up to 16 MHz
Resonator
External Digital Clock Source
External Resistor
16-Bit Timer_A With Three Capture/Compare Registers

P87C554 code extraction

The P87C554 Single-Chip 8-Bit Microcontroller is manufactured in an advanced CMOS process and is a derivative of the 80C51 microcontroller family. Beijing Sichip offers the P87C554 mcu reverse service. If you have such needs, welcome to touch me for more details. Email: sichip209@gmail.com  Skype: techip.mcu.02

Features of P87C554:
80C51 central processing unit
16k x 8 EPROM expandable externally to 64k bytes
An additional 16-bit timer/counter coupled to four capture registers and three compare registers
Two standard 16-bit timer/counters
512 x 8 RAM, expandable externally to 64k bytes
Capable of producing eight synchronized, timed outputs
A 10-bit ADC with eight multiplexed analog inputs
Fast 8-bit ADC option
Two 8-bit resolution, pulse width modulation outputs
Five 8-bit I/O ports plus one 8-bit input port shared with analog inputs
I²C-bus serial I/O port with byte oriented master and slave functions
On-chip watchdog timer
Extended temperature ranges
Full static operation - 0 to 16 MHz
Operating voltage range: 2.7 V to 5.5 V (0 to 16 MHz) and 4.5 V to 5.5 V (16 to 33 MHz)
Three security bits
Encryption array - 64 bytes
4 level priority interrupt
15 interrupt sources

LPC4357FET256 chip decryption

Beijing Sichip offers the LPC4357FET256 code extraction service. If you have such needs, welcome to touch me. Email: sichip209@gmail.com  Skype: techip.mcu.02

The LPC4357FET256 is an ARM Cortex-M4 based digital signal controller with an ARM Cortex-M0 coprocessor designed for embedded applications requiring signal processing.

Features of LPC4357FET256:
Hardware floating-point unit
Non-maskable Interrupt (NMI) input
JTAG and Serial Wire Debug (SWD)
System tick timer
ARM Cortex-M0 co-processor running at frequencies of up to 204 MHz
136 kB SRAM for code and data use
Two 32 kB SRAM blocks with separate bus access
32 kB ROM containing boot code and on-chip software drivers
32 bit One-Time Programmable (OTP) memory for customer use
Serial GPIO (SGPIO) interface
State Configurable Timer (SCT) subsystem on AHB
Quad SPI Flash Interface (SPIFI) with four lanes and up to 40 MB per second
10/100T Ethernet MAC with RMII and MII interfaces and DMA support
Two SSP controllers with FIFO and multi-protocol support